Wi-Fi: WPS
WPS, or Wi-Fi Protected Setup, is a standard that allows easy establishment of a
secure wireless home network. This feature is set to Enable by default. If you change
these settings, currently connected devices may be disconnected.
• WPS Switch: You may Enable or Disable WPS by selecting the desired option and
clicking Apply. When enabled, the WPS Mode options will appear.
• WPS Mode: You may select either PIN or PBC (Push-Button Connection) as follows:
– PIN: If selected, you will need to specify a 4-digit or 8-digit PIN that other devices
must enter to connect via this method. Enter the desired PIN in the PIN eld and
click Enter WPS PIN.
– PBC: If selected, this will act in the same way as manually pushing the WPS
button on the back of the AT&T Wireless Internet device. Click WPS Push Button,
and within two (2) minutes, you will need to activate WPS on the device you wish
to connect to the AT&T Wireless Internet device via a physical or virtual button in
order to complete the connection process.
NOTES:
• Refer to your connecting device’s documentation for specic information on how
to complete the WPS process on the desired device.
• If the Broadcast Network Name (SSID) option is set to Disable (see page 35), the
WPS function will not be available.
37
To Next Page
Loading...
