Advanced
Advanced: Administrator
This page allows you to change the default login (“attadmin”) used to access the
AT&T Wireless Internet Manager.
• Current Login: Enter the current login for the AT&T Wireless Internet Manager in
this eld. The default login is “attadmin”.
• New Login: Enter the new login, using only letters, numbers, and standard
punctuation symbols. The login must be at least four (4) characters long, but no
longer than 32 characters.
• Verify New Login: Enter the new login again, and then click Apply.
NOTE: Once you change the default login, there is no way to retrieve the new login.
If you forget the new login, you must reset the AT&T Wireless Internet device to
its factory settings to restore the default login (“attadmin”). To do so, remove the
bottom cover of your AT&T Wireless Internet device, and using a ballpoint pen,
press and hold the RESET button for eight (8) seconds.
• Login Visibility: Click On to show the login on screen; click O to hide the login.
42
To Next Page
Loading...
