AT&T MF279 - Ctia

50
CTIA
• Do not disassemble or open, crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to re, explosion
or other hazard.
• Only use the battery for the system for which it is specied.
• Only use the battery with a charging system that has been qualied with the
system per CTIA Certication Requirements for Battery System Compliance to IEEE
1725. Use of an unqualied battery or charger may present a risk of re, explosion,
leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact
battery terminals.
• Replace the battery only with another battery that has been qualied with the
system per this standard, IEEE-Std-1725. Use of an unqualied battery may present
a risk of re, explosion, leakage, or other hazard.
• Promptly dispose of used batteries in accordance with local regulations.
• Battery usage by children should be supervised.
• Avoid dropping the AT&T Wireless Internet device or battery. If the device or battery
is dropped, especially on a hard surface, and the user suspects damage, take it to a
service center for inspection.
• Improper battery use may result in a re, explosion, or other hazard.
• For those host devices that utilize a USB port as a charging source, the host device’s
user manual shall include a statement that the phone shall only be connected to
CTIA certied adapters, products that bear the USB-IF logo or products that have
completed the USB-IF compliance program.