• UPnP Settings: Universal Plug and Play (UPnP) is a set of networking protocols that
permits networked devices to discover each other’s presence on the network. The
default value for this setting is Disable.
• VPN Passthrough: This feature allows VPN client soware on connected devices to
connect through this device to remote VPN servers. Normally, this option should be
set to Enable.
• MAC-IP Bind: Select Enable to bind IP address and MAC address on your device.
• MAC Address: The MAC address is a network identier. This read-only eld displays
the MAC address for the Wi-Fi interface on this device.
• IP Address: The IP address for this device, as seen from the local network. This is
set to a default value.
• Current Bind List: Lists any MAC-IP Bind you have bound.
44
To Next Page
Loading...
