AT&T SB67118 DECT 6.0 - LCD Contrast; Key Tone; Language

Use this feature to change the display language that is used in all menus and
screen displays. Set the display language on the telephone base and each
extension separately. This telephone comes factory set for English displays.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to Base setup. Press MENU/ENTER.
Press or to scroll to Language. Press MENU/ENTER.
Press or to select English or Espanol.
1.
2.
3.
4.
LCD contrast
Use this feature to adjust the screen contrast to one of six levels to optimize
readability in different lighting conditions.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to Base setup.
Press MENU/ENTER twice to select LCD contrast.
Press or to adjust the screen contrast level. The
screen display temporarily fades away as you press
and reappears as you press .
Press MENU/ENTER to save the setting and return to the
previous menu. There is a confirmation tone. To exit,
press EXIT.
1.
2.
3.
4.
5.
Call log
Ringer setting
Mailbox setup
Base setup
>
LCD contrast
Key tone
Language
Line selection
>
Language
Call log
Ringer setting
Mailbox setup
Base setup
>
Key tone
Use this feature to turn the key tone on and off. The telephone base is
factory programmed to beep with each key press. If you turn off the key
tone, there are no beeps when you press keys.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to Base setup. Press MENU/ENTER.
Press or to scroll to Key tone. Press MENU/ENTER.
Press or to scroll to On or Off.
Press MENU/ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
1.
2.
3.
4.
5.
Call log
Ringer setting
Mailbox setup
Base setup
>
Key tone
:Off
ENTER=Save
LCD contrast
Key tone
Language
Line selection
>
Getting started
Telephone base setup
19
LCD contrast
ENTER=Save
LCD contrast
Key tone
Language
Line selection
>