Answer a PTT call
1. When you hear two beeps, the screen displays PTT from: X:Handset X (X
represents the extension number [1-0], Handset X represents the default
handset name).
2. Press INT to convert the call into a normal intercom call with that extension.
-OR-
Respond with a new PTT call. Wait for the end of the three-second PTT wait
state (the screen changes to idle mode) then, to respond with the telephone
base, see PTT to a single handset or PTT to all handsets on the previous
page. To respond with a handset, see Answer a PTT call in the SB67108
handset manual.
NOTE: If the PTT call is sent to all handsets, the intercom call is established with the first one
who presses INT.
Convert PTT call to intercom call
You can convert the PTT call to a two-way intercom call on the called
telephone base.
1. Press INT on the called extension to convert the call to a two-way
intercom call.
2. Optionally, put the corded handset on the telephone base or press
SPEAKER to end the intercom.
End a PTT call
Press EXIT to end the incoming PTT call. •
Telephone base operation
Push to talk (PTT) intercom
53
To Next Page
Loading...
