EasyManua.ls Logo

AT&T SB67118 DECT 6.0 - Appendix

AT&T SB67118 DECT 6.0
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. The screen displays Delete all old messages? <=No >=Yes.
Press REP to cancel this operation, and returns to the
previous menu, or press SKIP to remove all old messages
from the general mailbox.
Delete all old messages in the handset mailbox:
When the telephone is idle, press Messages on the
telephone base.
Press the one-touch EXT 1-0 key for the destination extension mailbox.
Use the dial pad to enter the four-digit remote access code of the extension.
Use REMOVE to backspace and delete a digit.
Press or to scroll to Delete all old. Press MENU/ENTER.
The screen displays Delete all old messages? <=No >=Yes.
Press REP to cancel this operation, and returns to the
previous menu, or press SKIP to remove all old messages
from the handset mailbox
NOTE: If there are any new and unreviewed messages in the general mailbox, the
Messages indicator still flashes after you delete all old messages.
Transfer message
When a message is playing in the general mailbox or handset mailbox,
you can transfer the message to a single extension, all extensions or the
telephone base.
When a message is playing on the telephone:
1. Press XFER on the telephone base.
2. Press or to scroll to an extension, all extensions or the
telephone base, then press MENU/ENTER.
-OR-
Press the one-touch EXT 1-0 key on the telephone base, the message is
automatically transferred to the desired extension.
A copy of the message automatically transfers to the desired extension, all
extensions or the telephone base. The general mailbox retains the original
copy of the message.
1.
2.
3.
4.
5.
Answering system
Answering system operation
74
XFER
Delete all old
messages?
<=No >=Yes
All deleted
3 New messages
To general MBox
Fast answer mode
Delete all old
>

Table of Contents

Related product manuals