Remaining space
Use this feature to check the current system space for the estimated
remaining recording time and number of messages.
When the telephone is idle, press MENU/ENTER.
Press or to scroll to Mailbox setup. Press MENU/ENTER.
Press or to scroll to Remaining space. Press
MENU/ENTER.
After checking the screen display, press REP to return
to the previous menu.
1.
2.
3.
4.
Set access code
Call screening
Notify alert
Remaining space
>
Remaining space
Time: 175 min
Messages: 243
Call alert confirmation:
You can confirm whether the system can successfully call the alert number
that you entered.
Press or to scroll to Calling alert #. Press MENU/ENTER.
The screen displays Press SPKR to confirm the
alert call.
Press SPEAKER on the telephone base. You should
hear the telephone number being dialed. To exit without
making changes, press EXIT.
After confirming that the call went to the telephone number
you specified, press SPEAKER again to end the test.
The screen returns to idle mode.
NOTES:
If you turn on Notify alert before you enter the alert number, Please set the alert #. appears
on the screen.
The called telephone hears silence when the system calls the alert number.
To initiate a call alert call again, do the first three steps of the Call alert confirmation section (above).
1.
2.
3.
4.
1.
2.
3.
Alert call #
Alert on/off
Calling alert #
>
Press SPKR to
confirm the
alert call
Calling alert #
Getting started
Mailbox setup (for general mailbox)
Directory
Call log
Ringer setting
Mailbox setup
>
32
To Next Page
Loading...
