AT&T Synapse SB67020 - Accessing the Call Log

20
The Call Log provides available name and number information for the last 50 calls received.
To access the Call Log list:
1. From the Idle screen, press MENU, then 1, and then 8 (Call Appearance
mode) or MENU, then 1, and then 6 (Line Appearance mode). The newest
call appears first.
New missed calls are indicated with the [NEW] icon.
2. Press the r or s
Navigation key to reach the desired entry.
• Press
to access dialing options before calling a number and to
dial out the number.
• Call Log entries may not be in the proper format for dialing. In some areas, you need to remove the area
code or add or remove a 1. Press the v or w Navigation key to view the dialing options.
• Press
to dial the on-screen number.
Plays message. Appears only
when there is a message.
Deletes the entry. Dials the entry.
Stores number in your
Personal list.
Clears [NEW] indication
from the entry
Deletes all entries.
If the caller left a voicemail message, indicated by tape icon, you may play the message from the Call Log list.
20
Accessing the Call Log