5
Getting started
Deskset installation
IMPORTANT INFORMATION:
Use only the power adapter supplied with this product. To order a replacement power adapter,
visit our website at www.telephones.att.com, or call
1 (888) 915-2007. In Canada, dial 1 (866) 288-4268.
The power adapter is intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
•
•
Install the deskset as shown below.
Plug the end of the coiled
handset cord into the jack at
the bottom of the deskset.
Plug the small end of the
power adapter into the
power jack at the bottom of
the deskset.
Plug the large end of
the power adapter into
a power outlet not
controlled by a wall
switch.
Raise the antenna for
optimum wireless range
and performance.
Route the power adapter
cord through the slot at the
bottom of the deskset.
To Next Page
Loading...
