AT&T SynJ SB67148 - Backup Battery Installation

6
Getting started
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model 27910). To order, visit
our website at
www.telephones.att.com, or call 1 (888) 915-2007. In
Canada, dial
1 (866) 288-4268.
Press down the tab to open the battery compartment cover.1.
Place the battery in the compartment.
Make sure the supplied battery with
the label THIS SIDE UP faces up as
indicated.
2. Align the cover flat against the
battery compartment, then press
down until it clicks into place.
3.
Backup battery installation
Battery Pack
89-1323-00-00
Model 27910
3.6V 600mAh NI-MH
WARNING: DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA BY1029
Battery Pack
89-1323-00-00
Model 27910
3.6V 600mAh NI-MH
WARNING: DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA BY1029
Install the backup battery as shown below. In the event of a power failure,
the charged backup battery allows the deskset to operate. Plug in the AC
power adapter into the power jack at the bottom of the deskset to charge the
backup battery.