36
Deskset operation
PTT to all devices
When the deskset is not in use, press the PTT key. Press
DIR or CID to
choose
#
: All. Then press and hold PTT until the deskset displays
PTT to: All Release PTT key to stop.
-OR-
When the deskset is not in use, press and hold the PTT key until the
deskset displays PTT to: All Release PTT key to stop.
When the connection is made, both the caller and the destination parties
hear two beeps.
Speak towards the deskset speakerphone. Your voice is broadcast to
all extensions. Release the PTT key after speaking. There is a three-
second PTT wait state with -MUTE slowly flashing on the screen and the
MUTE indicator flashing. During the PTT wait state, if necessary, you can
press and hold the PTT key to continue to speak towards the deskset
speakerphone.
Any system device can reply.
1.
2.
3.
4.
Push to talk (PTT) intercom
To Next Page
Loading...
Need help?
General