13
Menu settings
Use the menus to change the deskset settings.
Press the Menu softkey to enter the main menu when
the deskset is not in use.
Press
DIR or CID to scroll to the feature to beto scroll to the feature to be
changed. The > symbol indicates the selected menu item.
Press the Select softkey to select the menu item.
Press the Back softkey to cancel an operation, exit the menu display, or
return to the previous menu.
-OR-
Press
to return to the previous menu.
-OR-
Press EXIT to exit to idle mode without making any changes.
Ringer volume
Use this feature to set the ringer volume to one of three levels or turn the ringer
off. When the ringer is off,
icon appears on the deskset.
When the deskset is not in use, press the Menu softkey.
Press
DIR or CID to scroll to Ringer setting.
Press the Select softkey twice to select Ringer volume.
Press
DIR, or VOL+ to increase the ringer volume.
Press CID, or VOL- to derease the ringer volume.
Press the Save softkey to save the setting and return to
the previous menu. There is a confirmation tone.
NOTE: The ringer volume also determines the ringer volume for
intercom calls. If the ringer volume is set to off, the deskset is
silenced for all incoming calls, including intercom calls.
1.
2.
3.
4.
1.
2.
3.
4.
5.
Deskset setup
>Directory
Call log
Ringer setting
Mailbox setup
Back
Select
L1
Directory
Call log
>Ringer setting
Mailbox setup
Back
Select
L1
>Ringer volume
Ringer tone
Back
Select
L1
Back
Set
Ringer volume
L1
Deskset settings
To Next Page
Loading...
