AT&T SynJ SB67148 - Page 60

Answering system
55
To confirm the call alert number set correctly:
You can confirm whether the system can successfully call
the alert number that you entered.
Follow Step 1 through Step 3 in To set an alert number
on page 54.
Press
DIR or CID to scroll to Calling alert #. Press
the Select softkey. The screen displays Press SPKR to
confirm the alert call. You can p
ress the Back softkey
to exit.
Press
SPEAKER on the deskset. The deskset dials the
number you set and the phone being notified rings.
Press
SPEAKER again to end the test. The screen
returns to idle mode.
NOTE: When you turn on Notify alert before you enter the alert number, Please set alert #
appears on the screen.
1.
2.
3.
4.
Deskset mailbox setup
Calling alert
L1
Press SPKR to
confirm the
alert call
Back
L1
Alert call #
Alert on/off
>Calling alert #
Back
Select
L1