11
Getting started
Bundle the telephone line cord and power adapter cord neatly with twist
ties. Place the bundled cords into the space behind the telephone base.
5.
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie them
first. Push the wall mount bracket up to remove it from the wall.
Unplug the telephone line cord (or DSL filter) from the wall. Unplug the
power adapter from the power outlet. Lift the telephone base up to detach
it from the wall mount bracket.
See Telephone base installation on page 6.
1.
2.
3.
To Next Page
Loading...
Need help?
General
