79
Answering system
Answering system settings
Answer on/off
If you turn the answering system on, it answers calls and records messages
only on the home line. If your paired cell phone has voicemail, callers can leave
messages with that voicemail service.
If your answering system is turned off and you change any of its settings, the
answering system automatically turns on again.
When the answering system is turned on, the /ANS ON/OFF light on the
telephone base is on and the handsets display ANS ON.
To turn the answering system on or off:
Using the telephone base:
Press /ANS ON/OFF to turn the answering system on or
off. When the answering system is turned on, it announces,
“Calls will be answered.” When the answering system is
turned off, it announces, “Calls will not be answered.”
NOTE: If the answering system is off and there is an incoming call,
the system answers after ten rings and announces, “Please enter your
remote access code.” For more information about remote access, see
pages 93-94.
Using a handset:
Press MENU on the handset in idle mode to enter the
main menu.
Press CID or DIR to highlight Answering sys, then press
SELECT.
Press CID or DIR to highlight Answer ON/OFF, then
press SELECT.
Press CID or DIR to highlight On or Off, then press
SELECT to save. You hear a confirmation tone.
1.
2.
3.
4.
ANSWER ON/OFF
On
Off
BACK
SELECT
ANSWERING SYS
Delete all old
Record memo
Answer ON/OFF
BACK
SELECT
To Next Page
Loading...
