AT&T TL92273 User Manual

37
Telephone settings
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
Press MENU in idle mode.
Press CID or DIR to highlight Settings, then press
SELECT .
Press CID or DIR to highlight Dial mode, then press
SELECT .
Press CID or DIR to choose Touch-tone or Pulse,
then press SELECT. The screen shows DIAL MODE
is touch-tone or DIAL MODE is pulse. There is a
confirmation tone and the screen returns to the
previous menu.
Web address
You can use this feature to view the AT&T website address.
Press MENU on the handset in idle mode to enter the
main menu.
Use CID or DIR to scroll to Web address, then
press SELECT. The handset screen shows the AT&T
website address.
Press OK to exit.
1.
2.
3.
4.
1.
2.
3.
DIAL MODE
Touch-tone
Pulse
BACK SELECT
SETTINGS
Key tone
CID time sync
Dial mode
BACK SELECT
Set date/time
Caller ID annc
Settings
Web address
BACK SELECT
www.telephones
.att.com
OK

AT&T TL92273 Specifications

General

Brand	AT&T
Model	TL92273
Category	Cordless Telephone
Language	English