51
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
To access a number in the directory while on a call:
Press OPTION .
Press CID or DIR to highlight Directory, then press SELECT .
Press CID or DIR to highlight the desired directory, then press REVIEW .
Press CID or DIR to highlight to the desired entry or perform an
alphabetical search (page 66).
Press DIAL to dial the displayed number.
To access a number in the caller ID log while on a call:
Press OPTION .
Press CID or DIR to highlight Caller ID log, then press SELECT .
Press CID or DIR to scroll to the desired entry.
Press CALL to dial the displayed number.
To access the redial list while on a call:
Press REDIAL/PAUSE.
Press CID, DIR, or REDIAL/PAUSE until the desired number displays.
Press DIAL to dial the displayed number.
NOTES:
You cannot edit a directory entry while on a call. For more details about the directory, see
page 62.
You cannot copy a caller ID log entry into the directory while on a call. For more details about
caller ID log, see page 70.
You can only view the numbers in the directory, caller ID log or redial list while on a call and
cannot edit, delete or save entries.
Press OFF/CANCEL to exit redial list, directory or caller ID log while on a call.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
•
•
•
•
To Next Page
Loading...
Need help?
General
