AT&T TL96477 - Allow List

118
Smart call blocker
Call block settings
Allow list
Add numbers that you want to allow their calls to get through to you. The allow
list stores up to 200 entries.
Add an allow entry:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU to enter the main menu when it is not in use. Press CID or DIR
to scroll to Smart call blk, then press SELECT.
2. Press CID or DIR to scroll to Allow list, and then press SELECT.
3. Press CID or DIR to scroll to Add new entry, then press SELECT.
4. When the screen displays ENTER NUMBER, use the dialing keys to enter a
number (up to 30 digits).
f Press CID or DIRtomovethecursortotheleorright.
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a digit.
f Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone
base to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID or DIR or REDIAL/PAUSErepeatedlytondthedesirednumber.Press
INSERT to copy the number.
5. Press NEXT to move on to the name.
f The screen shows Number already saved if the number is already in the
block list. You cannot save the same number twice.
6. When the screen displays ENTER NAME, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears.Therstcharacterofeverywordiscapitalized.
f Press CID or DIRtomovethecursortotheleorright.
f Press 0 to add a space.
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase a character.