AT&T TL96477 - Wall-Mount to Tabletop; Installation

18
Getting started
Installation options
Wall-mount to tabletop installation
To change the telephone base from the wall-mount position to tabletop
position, follow the steps, as mentioned below.
1. Unplug the large end of the power adapter from the electrical outlet.
2. If the telephone line cord and power adapter cord are bundled, untie
themrst.Slidethewall-mountbracketupandremoveitfromthe
wall-mounting plate.
4. See Telephone base installation on page 11.
18
3. UnplugthetelephonelinecordortheDSLlterfromthetelephonewall
jack. Push the telephone base up and away from the wall-mount bracket to
detach it from the wall-mount bracket.