AT&T TL96477 - Dial Mode

49
Telephone settings
Handset and telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Settings, then
press SELECT.
3. Press CID or DIR to highlight Dial mode, then
press SELECT .
4. Press CID or DIR to choose Touch-tone or Pulse,
then press SELECT. The screen shows DIAL MODE is
touch-tone/pulse.Youhearaconrmationtoneandthe
screen returns to the previous menu.
SETTINGS
Key tone
CID time sync
Dial m o de
BACK SELECT
DIAL MODE
Touch-tone
Pulse
BACK SELECT
SETTINGS
Key tone
CID time sync
Dial m o d e
BACK SELECT
DIAL MODE
Touch-tone
Pulse
BACK SELECT