AT&T TL96477 - Redial; Last Number Redial; Dial a Redial Entry

65
Telephone operation
Redial
Last number redial
The telephone base and each handset store the last 10 dialed numbers (up
to 30 digits each) in the redial list. The redial entries of each handset and the
telephone base are independent.
To view the 10 most recently dialed numbers:
Using a handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly
to browse until the desired number displays.
The handset beeps twice at the end of the list.
3. Press OFF/CANCEL to exit.
Using the telephone base:
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse
until the desired number displays. The telephone base
beeps twice at the end of the list.
3. Press BACK or CANCEL to exit.
Dial a redial entry
Using a handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays. The handset beeps twice at the end of the list.
3. Press HOME/FLASH or /SPEAKER to dial using the home line, or press
CELL 1 or CELL 2 to dial using the cell line.
-OR-
1. Press HOME/FLASH or /SPEAKER to dial using the home line, or press
CELL 1 or CELL 2 to dial using the cell line, then press REDIAL/PAUSE to
enter the redial list.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays. The handset beeps twice at the end of the list.
f If you are using the cell line, press INSERT to select the desired number.
3. Press DIAL to dial the number displayed.
1/2
REDIAL
888-883-2445
BACK SAVE
1/2
REDIAL
888-883-2445
SAVE