b) On the wireless device you wish to
connect, view the list of available
Wi-Fi networks. Locate and select
your hotspot's network name
(e.g., ATT-WIFI-XXXX).
c) Click Connect or Join.
d) Input the password for the network.
(Refer to the home screen of your
Velocity 2 for this password.) If needed,
select Next.
3. Launch your browser.
Connect a WPS-Enabled Wireless Device
You can connect WPS-enabled devices to your mobile hotspot
without the need to manually enter a password.
From your AT&T Velocity 2:
1. Press and hold the WPS button on your Velocity 2.
2. On the touch screen, tap Pair with Main Wi-Fi or (if Guest Wi-Fi
is enabled) Pair with Guest Wi-Fi.
10
GET STARTED
To Next Page
Loading...
