AT&T Velocity 2 - Troubleshooting

2. Click Firewall Port Forwarding.
3. Beside Port Forwarding Settings, click Enable.
4. Click Apply. The Port Forwarding Settings options and Current
Virtual Servers (port forwarding rules) list will appear. Incoming
trac will be forwarded to specic ports and devices on your
network using their local IP addresses.
5. Identify the ports to forward by entering information in the
following elds: IP Address, Port Range, Protocol (optional),
and Comment.
6. Click Apply.
Caution: Port forwarding creates a security risk. When not required,
port forwarding should be disabled.
Enable MAC/IP/Port Filtering
You can enable or disable the MAC/IP/Port Filtering feature to
block certain internet trac. When this setting is enabled, you can
choose whether trac is accepted or dropped by default.
1. Log in to the AT&T Wi-Fi Manager, and click Settings in the
navigation menu.
2. Click Firewall MAC/IP/Port Filtering.
3. Beside MAC/IP/Port Filtering, click Enable.
4. Click an option to set the Default Policy:
• Accepted – Internet trac is allowed by default. Only trac
from the selected applications will be blocked from accessing
the internet. Trac is identied by port numbers.
41
ADVANCED SETTINGS