1. Log in to the AT&T Wi-Fi Manager, and click Settings in the
navigation menu.
2. Click Advanced Router.
3. Beside VPN Passthrough, click Enable.
4. Click Apply.
Congure APN Details
The Access Point Name (APN) is checked to determine the type
of network connection to establish. Your mobile hotspot comes
precongured with the APN for AT&T.
Add an APN for Another Network
1. Log in to the AT&T Wi-Fi Manager, and click Settings in the
navigation menu.
2. Click Network APN.
3. Beside Mode, click Manual.
4. Click Add.
5. Enter the Prole Name and APN (obtained from your carrier).
6. In the Authentication drop-down menu, select a mode: NONE
(default), CHAP, or PAP.
7. Enter the User Name and Password, if these are required for
the wireless network.
8. Click Save. (Or, to use the new entry as the default APN, click
Set Default OK.)
43
ADVANCED SETTINGS
To Next Page
Loading...
