AT&T Velocity 2 - Enable DMZ; Enable VPN Passthrough

Some applications are predened. You can dene additional
applications by clicking Add Custom Application, but you
need to know details of the trac used and generated by
the applications you wish to dene. In particular, you need to
know the port numbers and the protocol (TCP, UDP) used by
outgoing trac.
• Dropped – Internet trac is blocked by default. Only trac
from the selected predened or custom applications is
allowed to access the internet.
5. Click Apply.
Enable DMZ
In a DMZ (demilitarized zone) network conguration, a computer
runs outside the rewall in the DMZ. This computer intercepts
incoming internet trac, providing an extra layer of protection for
the rest of the network.
1. Log in to the AT&T Wi-Fi Manager, and click Settings in the
navigation menu.
2. Click Firewall DMZ.
3. Beside DMZ Settings, click Enable.
4. In the DMZ IP Address eld, enter the IP address of the
computer you want to use to screen incoming trac.
5. Click Apply.
Enable VPN Passthrough
Before devices connected to your mobile hotspot can connect to a
Virtual Private Network (VPN), you must enable VPN Passthrough.
42
ADVANCED SETTINGS