AT&T Velocity 2 - Health and Safety Information

Select an APN Entry to Use
1. From Settings Network APN, beside Mode, click Manual.
2. In the Prole Selection drop-down menu, select the entry for
the APN you wish to use.
3. Click Set Default OK.
Remove an APN Entry
1. From Settings Network APN, beside Mode, click Manual.
2. In the Prole Selection drop-down menu, select the entry for
the APN you wish to remove.
3. Click Delete OK.
Set Router Options
1. Log in to the AT&T Wi-Fi Manager, and click Settings in the
navigation menu.
2. Click Advanced Router.
3. Enter the desired information in each section.
4. Click Apply.
Notes:
• You may need to reconnect to the wireless network aer
applying changes.
• When DHCP Server is set to Enable, it automatically assigns an
IP address to each device on the network and manages their
conguration information.
44
ADVANCED SETTINGS