Recharge using a USB port:
1. Attach one end of the USB Type-C cable to your Velocity 2.
2. Connect the other end of the cable to the USB port on
a computer.
When the battery is fully charged, the status indicator light on the
Velocity 2 will be solid green, and the touch screen battery icon will
appear full: .
Security
Change Wi-Fi Network Name or Password
You can customize the network name and/or password for the
Main or Guest Wi-Fi network(s) on the AT&T Wi-Fi Manager.
Note: When Guest Wi-Fi is enabled (see Guest Wi-Fi on page 13), the
default Guest Wi-Fi network name is the same as the Main Wi-Fi
network name with “-GUEST” added.
On the AT&T Wi-Fi Manager:
1. Log in.
2. From Home, click Edit Main Wi-Fi or Edit Guest Wi-Fi.
or
Click Settings in the navigation menu, and then click
Wi-Fi Basic.
3. Click the Network Name (SSID) eld and enter a new name,
and/or click the Password eld and enter a new password.
30
USE YOUR VELOCITY 2
To Next Page
Loading...
