Replace the SIM Card
Your Velocity 2 comes with the nano-SIM card preinstalled.
If you need to replace the nano-SIM card, follow
these steps:
1. Power o your Velocity 2. Insert
the tip of the tray eject tool
into the hole next to the
card tray.
2. Pull out the card tray. Remove
the existing nano-SIM card
(if present).
3. Insert the new nano-SIM card.
Note: You can also insert a
microSDXC card (sold separately)
in the card tray, as shown.
4. Carefully slide the tray back
into place.
37
USE YOUR VELOCITY 2
Nano-SIM
card
microSDXC
card
To Next Page
Loading...
