AT&T Velocity 2 - Enable DMZ; Enable VPN Passthrough

Reset Your Velocity 2
You can reset your Velocity 2 to factory default settings. (You may
need to do so to restore the default AT&T Wi-Fi Manager login if
you have changed it and cannot remember the new one.)
Notes:
• If you reset your Velocity 2 to factory settings, all of your
customizations will be lost.
• When you reset your Velocity 2, any currently connected devices
will be disconnected. They will have to be reconnected aer the
Velocity 2 restarts. If the Guest Wi-Fi network was in use, you will
need to enable it again. (See Guest Wi-Fi on page 13.)
On the touch screen:
1. From the home screen, tap Settings.
2. Tap Factory Reset.
3. Tap Reset device OK.
On the AT&T Wi-Fi Manager:
1. Log in, and click Settings in the navigation menu.
2. Click Advanced Device Reset.
3. Click Reset OK.
Aer the device has restarted, reconnect Wi-Fi devices.
38
USE YOUR VELOCITY 2