AT&T Velocity 2 - View Network Information; Enable Port Forwarding

Check for and Install an Update
On the touch screen:
1. If you have received an update alert: You can choose to update
now or to postpone. Go to step 4.
If you want to check for updates manually: From the home
screen, tap Settings.
2. Tap AT&T Soware Update.
3. Tap Check for Updates.
4. If an update is available, the soware will be downloaded
automatically. If the update is not critical, you have two options:
• Tap Reboot & install to install the update immediately.
or
• Tap Remind me later to postpone the update. Aer 4
hours, an alert will appear reminding you that the update is
available. You can postpone the update two more times (up
to 12 hours total), aer which you will only have the Reboot &
install option.
Note: If the update is critical, you will only have the Reboot &
install option.
5. Before you begin the update, plug in your Velocity 2 to a wall
outlet using the USB Type-C cable and the wall charger. This
ensures that your Velocity 2 will have power so that the update
can be completed. If you received a low-battery warning, tap
Begin aer plugging in the device.
36
USE YOUR VELOCITY 2