AT&T Velocity 2 - Security

On the AT&T Wi-Fi Manager:
1. Log in, and click File Sharing in the navigation menu.
2. Click the Settings tab.
3. Click USB Only to set the sharing mode.
4. Click Apply.
5. Connect your Velocity 2 to a computer with the USB Type-C
cable.
6. Press and hold the touch screen to unlock your Velocity 2,
and tap OK to continue. When you enable this function,
Wi-Fi will be turned o.
You can now access les using your computer’s le viewer.
Note: You cannot use the browser interface for sharing les via
USB, only via Wi-Fi. See Share Files via Wi-Fi on page 23.
26
USE YOUR VELOCITY 2