AT&T Velocity 2 - RF Exposure Information (SAR)

Problem Suggested Solution(s)
Connected device
cannot access the
internet
Check that the nano-SIM card is correctly
inserted in the Velocity 2.
Move the Velocity 2 to a location with a
better signal.
Contact your service provider.
Cannot access the
AT&T Wi-Fi Manager
Enter the correct address. The default
address is http://192.168.1.1 or
http://attwimanager.
Only use one network adapter in your PC.
Do not use any proxy server.
Password is
incorrect /
Forgot password
The Main Wi-Fi network password appears
on your Velocity 2 home screen. The
default password appears on a label
on your Velocity 2. If the Guest Wi-Fi
network is enabled, tap the arrow on
your Velocity 2 home screen to see
the Guest Wi-Fi password.
If you have changed the password for the
Main Wi-Fi and/or Guest Wi-Fi network(s)
and have forgotten the new one, you must
restore the factory default settings. See
Reset Your Velocity 2 on page 38.
46
TROUBLESHOOTING