IPPBX IP08 User Manual
~ 12 ~ ATCOM TECHNOLOGY CO., LIMITED
It needs support of FXS module, the module installed in IP08 can be:
AX210S: dual FXS port
AX210XS: one FXO port and one FXS port
Analog phone is available to make calls once connected to the corresponding FXS port, IPPBX configures FXS
extension automatically when FXS module is detected and they can’t be deleted.
NOTE: FXS extension number range is defined in PBX Settings -> Options -> Extension Preference, changing
it can change the FXS extension number.
Extension
Extension number, i.e. 6101, it is associated with this particular user / phone.
Port
The analog port bound with extension.
Name
A character-based name for this extension, i.e. ‘Bob Jones’.
Caller ID
CID showed in the other’s phone during a call, default is Extension.
Enable Voice Mail
Check this option to enable voice mail account for the extension. Enabled by default.
Voice Mail Access PIN Code
Password for accessing this voice mail account, default is 123456. It’s also the password for extension to login his
administration web page.
Enable Sending Voice Mail
Check this option to enable PBX send new voicemail to Email address below as an attachment.
Email Address
The Email address that new voicemail will be send to when Enable Sending Voice Mail is enabled and PBX
settings -> SMTP settings is right set.
To Next Page
Loading...
Need help?
General