There are three ways to set an IP address to WAN port: DHCP, Static IP, PPPoE.
DHCP
IPPBX will obtain an IP address automatically from DHCP server when rebooting. It’s not recommended to
choose this option unless there is a reserved IP for IPPBX in DHCP server so that IPPBX can keep the same IP
all the time.
Static IP
Set an IP address manually according to the real network environment. If IPPBX is behind a router, the gateway
is usually set to the IP of the router.
PPPoE
IPPBX will obtain an IP address automatically after establishing a connection to PPPoE server with username
and password.
To Next Page
Loading...
Need help?
General