EasyManuals Logo

ATCOM IPPBX IP08 User Manual

Default Icon
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
IPPBX IP08 User Manual
~ 13 ~ ATCOM TECHNOLOGY CO., LIMITED
Rxgain
Adjust the volume sent to FXS extension. There are 3 options: 20%,60%,100%.
Txgain
Adjust the volume sent out by FXS extension. There are 3 options: 20%,60%,100%.
5) Flash
Hook Flash Detection Time
Sets the amount of time, in milliseconds, that the hook-flash must remain depressed in order for IPPBX to
consider such an event a valid flash event. The default value of it is 1250 ms and it can be configured in 1 ms
increments.
Sequential Hook Flash Interval
Sets the amount of time, in milliseconds, that must have passed since the last hook-flash event received by
IPPBX before it will recognize a second event. If a second event occurs in less time than defined in here, then
IPPBX will ignore the event. The default value is 750 ms, and it can be configured in 1 ms increments.
6) Follow Me
Follow me is a feature to let an incoming call to a called party to be redirected to a third party, the third party can
be a voicemail box, ring group, mobile telephone and so on.
When callee is No Answer / Busy / Unreachable, incoming calls will go to voicemail by default, if voicemail is
disabled, call will be hung up.

Other manuals for ATCOM IPPBX IP08

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ATCOM IPPBX IP08 and is the answer not in the manual?

ATCOM IPPBX IP08 Specifications

General IconGeneral
BrandATCOM
ModelIPPBX IP08
CategoryPBX
LanguageEnglish