SMART ON-OFF LEVEL CONTROLLER
With the "Pump Off" mode, the pump operation is stopped
If the pump is desired to operate manually, it can be done by selecting the "Pump
Manual" function from the menu.
When the function is entered, the pump starts working
and the "Pump On" screen is displayed.
The pump runs until you press any button on the controller
Alarm1 mode can be selected.
With the "High" mode, the high level alarm function can be
With the "Low" mode, the low level alarm function can be
With the "Off" mode, Alarm1 relay operation can be
Alarm2 mode can be selected.
"Steam & Control Technologies"
To Next Page
Loading...
Need help?
General
