ATECH LC 440 User Manual

SMART ON-OFF LEVEL CONTROLLER
5.3.10 Test Function
This function "Test Fonk" (TEST FUNCTION) is used to allows both alarm
relays to be de-energised (OFF) or energised (ON).
If "Tst Fonk" (Test Function) ON is selected, In run mode
Test Button can be use to test the alarm relay and the
external circuits.
If "Tst Fonk" (Test Function) OFF is selected, In run mode
Test Button can NOT be use to test the alarm relay and the
external circuits.
5.3.11 Password
To obstruct unauthorized interferences, LC 5400 has password protection.
This function "PassWrd Change" is used to change the password of device.
or buttons change each digit and button
passes to next digit. After change the last digit, button
saves the new password and returns to main menu.
To return to main menu without saving the changed value,
button is used.
Default password 000
New password
Warning !
Note: It is important that if the default pass code is changed that the new value is
noted and kept safe.
IM-LC440-20E-en Page 13
www.atech-ltd.com
LC 440
"Steam & Control Technologies"

ATECH LC 440 Specifications

General

Brand	ATECH
Model	LC 440
Category	Controller
Language	English