CS1912 / CS1914 User Manual
10
7. (Optional) Plug your USB peripherals into the type A sockets in the USB
hub section.
8. Plug the power adapter (provided with this package) into the switch’s
Power Jack and then plug the other end into a power source.
9. Power on the computers.
Note: 1. By default the switch links to the first computer that is powered
on.
2. It is recommended that the total cable length from the PC to
monitor is less than 3 meters.
3. Choosing high quality cables helps to ensure that 3840 x 1260 @
30 Hz resolutions can be reached.
To Next Page
Loading...
