ATEN CS692 - Hotkey Port Selection

To Next Page

To Previous Page

- 14 -

Hotkey Port Selection

All hotkey operations begin by tapping the Scroll Lock key twice.

See the Hotkey Summary Table for full details.

Note: If using [Scroll Lock] conflicts with other programs, [Ctrl]

can be used instead.

Alternate Entering Hotkey Mode

 Press [Scroll Lock] [Scroll Lock] [x] [Enter]. The entering

hotkey mode hotkey is now [Ctrl].

 Press and hold the remote port selector switch for three

seconds. The entering hotkey mode hotkey is now [Ctrl].

Note: These procedures toggle between the two methods.

Other manuals for ATEN CS692