CL-1208 / CL-1216 User Manual
22
Port Selection
The CL-1208 / CL-1216 provides three port selection methods to access the
computers on the installation: Manual; OSD (On Screen Display) menus, and
Hotkey. OSD Operation is discussed in the next chapter; Hotkey Port Selection
is discussed detail in Chapter 5.
Manual Port Switching
Press a switch to bring the KVM focus to the computer attached to its
corresponding port.
Press buttons 1 & 2 simultaneously for two seconds to perform a keyboard
and mouse reset.
Press buttons 7 & 8 (CL-1208) or 15 & 16 (CL-1216) simultaneously for
two seconds to invoke Auto Scan Mode (see p. 44).
cl12816_v2.book Page 22 Thursday, March 23, 2006 2:21 PM
To Next Page
Loading...
Need help?
General
