D620.388.00_QS_UK_01
24 / 42
Temperature probe connector
The J13 connector is used for tests with external capillary option.
Air supply input for options
Instant fitting: 6 mm diameter
— 0.6 MPa air supply input for internal
valves for 1 MPa range
— Vacuum input for vacuum range.
Metallic fitting: 4/6 mm diameter
— Regulator air supply for 1.1 to 2 MPa
range indirect mode.
Regulator output connector
This connector can be used as regulator output in indirect mode, for bypass option or
external capillary option.
Instant fitting: 8, 10 or 12 mm diameter for
1 MPa range maximum.
Metallic fitting: 4/6 mm or 6/8 mm diameter
for 2 MPa range (indirect mode).
To Next Page
Loading...
