ATEQ D620 - Page 39

D620.388.00_QS_UK_01
39 / 42
Label Function Description
FILTER
Filtering Stabilize the measurement values
MEAS. DELAY
Measurement delay During this time reject levels are not controlled
(perturbations)
MINI-VALVE
Mini valve Access to highest time resolution (fast test) and
auto zero time
NAME
Name Program customization
NO NEGATIVE
No Negative Replace negative value per 0
OFFSET
Offset Flow offset
PEAK HOLD MAX
Peak hold Give as result, the highest flow during the test
time
PR:SEQUENCE
Sequencing Allowed program automatic sequencing
PRE-FILL
Pre-fill types Special filling methods
PRESS. AZ
Pressure auto zero Define if Pressure auto zero is done before, after
the cycle or on demand (not done automatically)
PRESS. CORR.
Pressure correction Calculate flow measurement at a specific
pressure value, whatever the real test pressure is
REG. MODE
Regulator mode Define the method to control the electronic
pressure / flow regulator
REWORK LIMIT
Rework limits Additional levels for specific reworkable parts
SIGN
Sign Return opposite result
STAMPING
Stamp Pneumatic or electric output to identify the part
STD CONDITIONS
Standard conditions Calculate measured flow in other ATM pressure
and temperature condition (displays the unit with
an *)
UNITS
Units Access to International System or American or
Custom Units
VALVE CODES
Valve codes Available outputs for external automatism
CONFIGURATION menu
Use this menu to configure your ATEQ device.
LANGUAGE
GU G
PNEUMATIC
AUTOMATISM
SECURITY
MISCELLANEOUS
MAIN /CONFIGURATION
Label Function Description
LANGUAGE
Language Selection of the language displayed on the screen
PNEUMATIC
Pneumatics Configuration of the pneumatics functions of the device
>READY STATUS
- Out of cycle electronic regulator instruction choice
>Press. UNIT
- Pressure unit by default for the new programs
AUTOMATISM
Automatism Configuration of the different communications between
the device and its environment