ATEQ D670 - Page 28

QSG_D670_389.00_EN_01_2020-06-18
28/42
Direct mode – Option Dual Capillary with Shut Off - until 0.5
MPa – 6U case
This configuration is used for direct mode at medium pressure range.
Connection
Option / description
Air supply to 2
Connection of the air supply to the filter input (0.6 MPa)
3 to 4
Connection of the test output to the part under test (direct mode option)
4 to ATM
Connection of the part under test to the atmosphere
4 to 1
Connection of the part to test to P connector (external back pressure option)
5 to 6
Connection of the test flow 2 output to the part under test
6 to ATM
Connection of the part under test to atmosphere
6 to 7
Connection of the part to test flow 2 to P2 connector (external back pressure option)