ATEQ F620 - Page 176

Sheet # 689u –Results menu
Version 1.04a User guide ATEQ 6th series Page 2/2
To display the detail of the result, select it with
the
keys and validate with the
key.
4'57.

.#56

.#564'5
Ź P001
(PB)
TYPE LEAK TEST
600.0 mbar
20 Pa
10/01/2013 12:35:30
The "Results Reset" menu erases the
complete list displayed.
4'57.

.#564'57.65
Ź Results Reset
The STATISTICS menu displays the statistics
of the results by program.
4'57.65
SAVE ONE : NONE
LAST RESULTS
Ź STATISTICS
The results details are displayed in value and
in percents by program.
To change the program, select the "PROG"
line, validate with the
key, and then by
using the
key, choose the
program number to display, validate with
.
56#6+56+%5
Ź PROG. : 001
TOTAL : 17
PASS : 15, 88%
T FAIL : 2, 11%
R FAIL : 0, 0%
REWORK : 0, 0%
ALARM : 0, 0%
PRINT ALL STATS
The "PRINT ALL STATS" menu allows
sending all the statistics under frame format
on the communication port.
Note: this menu appears if the print conditions
are activated in the RS232 menu.
The "RESET ALL STATS" menu resets all the
statistics of all the programs.
56#6+56+%5
TOTAL : 17
PASS : 15, 88%
T FAIL : 2, 11%
R FAIL : 0, 0%
REWORK : 0, 0%
ALARM : 0, 0%
Ź PRINT ALL STATS
RESET ALL STATS