Sheet #621u – Sign
Version 1.04a User guide ATEQ 6th series Page 1/1
SIGN
1. PRESENTATION
The SIGN function enables reversing the sign (positive or negative) of the measurement result.
This function is useful in case of a vacuum application or indirect measurements as it allows the
display of a positive leak result.
2. PARAMETRAGE
Activate the function or check if it checked.
Press the
key, the cursor slide to the
right hand.
2#4#/2T
(70%6+10
ŹSIGN : No
More functions…
By using the arrows, select
"Yes" and validate with the
key.
The "Sign" function when validated, changes
the leak value sign.
Example: if the result is -004 Pa, the display
will be 004 Pa and vice versa.
2#4#/2T(70%6+10
SIGN : Yes Ż
More functions…
To Next Page
Loading...
Need help?
General
