（1）Within 3 days break
Make sure that the head is in good condition and shut down normally according to the operating
specifications.
（2）3-10 days break
The nozzle is first cleaned with deionized ions, cleaned and replaced with cleaning solution, and the
customer can be arranged to be on duty according to the operating specifications. It is best to follow the 3-
day maintenance process, start cleaning the nozzle, and print the test strip to retain the sample. Especially
during the Chinese New Year holiday, it is best to keep air conditioning in the workshop to maintain the
indoor temperature.
。
（3）More than 10 days break
It is necessary to clean the entire pipeline and the nozzle, and remove the nozzle; it is best to keep the nozzle in a
constant temperature room and shut down normally according to the operating specifications.
To Next Page
Loading...
