Atexco S - Printing Process Steps

Model S High Speed Sublimation printer
36
4.2 Printing process
Print job flow chart:
ⅠStart a printing job
Ⅱ Edit image
Ⅲ Print parameters settings
Ⅳ Print
1. Zoom
2. Drag the picture
3. Picture-repeat
4. Picture cropping
1. ICC curve setting
2. Channel settings
3. Density curve call
4. Single bidirectional settings
5. Pass number setting
1. Direct output printing
2. RIP file printing
Figure 4-3 Printing job flow chart
Import image file
Import images: Left-click on "Import image files" in "File".
Figure 4-4 Load image