To Next PageTo Next Page
Need help?Do you have a question about the Atexco X and is the answer not in the manual?
Terms and conditions for using the manual and product.
Definitions of safety symbols used in the manual.
Important factors to consider when installing the printer.
A short introduction to the Model X high-speed sublimation printer.
Conditions for the printer's operating environment.
Key specifications and characteristics of the printer.
Diagrams and explanations of the printer's main components.
Description of the initial screen displayed upon powering on the printer.
Interface for monitoring the printing status and progress.
Central menu for accessing various printer functions.
Interface for performing nozzle cleaning operations.
Settings and controls for the printer's drying function.
Interface for checking and managing printer alarms and error messages.
Controls for moving the printer's head carriage and paper feed.
Settings for the platen suction system.
Overview of the main screen of the printer's software interface.
Configuration options for printer software settings.
Detailed settings related to the printing process.
Adjustments for nozzle voltage and related parameters.
Configuration options for printer alarms.
Display and control of the printer's heating status.
Adjustments for print start position and machine movement.
Overview of the VEGAPrint RIP software.
Step-by-step guide to the printing workflow.
Configuration of various print-related parameters.
Configuration of ink channels and their properties.
Settings for managing print color and density.
Initiating the printing job after parameter setup.
Procedures for pausing and canceling print jobs.
Steps to take before powering on the printer.
Details on environmental, site, and pre-start checks.
Procedures for turning on and starting the printer.
Steps to power on the printer unit.
Checks to perform after the printer is powered on.
Process for cleaning the printer's nozzles.
Procedure for printing a test strip to check nozzle condition.
Instructions for handling and loading paper.
How to identify the printable side of the paper.
Steps for loading paper onto the printer.
Procedures for safely shutting down the printer.
Checks to perform before turning off the printer.
Actions to take after the printer is powered off.
Inspections to perform before and after printing jobs.
Daily tasks for keeping the printer in good condition.
Maintenance tasks to be performed weekly.
Maintenance tasks to be performed monthly.
Maintenance tasks to be performed annually.
Maintenance procedures for periods of inactivity or holidays.
Issues related to communication between printer components.
Faults associated with the printer's ink supply system.
Troubleshooting pressure-related alarms.
Addressing signal-related errors.
Problems with communication between the PC and the printer.
Issues with excessive nozzle temperature.
Faults related to the printer's lift motor.
Problems caused by clogged nozzles during printing.
Issues arising from material interference or damage during printing.
Analysis of printing defects and their causes.
Troubleshooting when a nozzle fails to print ink.
Addressing issues where nozzles spray ink at an angle.
Problems related to ink clogging across multiple nozzles.
Issues encountered during extended printing periods.
Troubleshooting when a nozzle operates erratically.
General