Model X High Speed Sublimation printer
41
Figure 4-13 Property Settings
4. Channel Settings: Select the order of the ink tracks and save them. (The order of this ink path should be
the same as the order of outputting the pure ink color card). You can click the “Print Test Strip” button to
print the color of each channel, and then input it in turn. The color on the “12345678” font is the
corresponding ink. The color of the road must be saved after modification.
All Ink: The ink color is not found in the Ink drop-down menu. Click on the All Ink button to find it.
Figure 4-14 Channel Settings
Warning: If you want to turn off an ink track, the file must be saved as, otherwise the data of the channel will
be lost.
5． Color Control: Mainly used to control the color and density of printing, color management.
A：Density curve: The purpose is to control the amount of ink produced by each ink to linearize the
level of each ink. (Hint: In order to get the best print results, we will create a density curve for each
combination of different printheads, inks, and fabrics as much as possible. When replacing the
printhead or using new ink, the density curve will be retested.) Click “Browse”, the interface
To Next Page
Loading...
